Retrofitting window reveal insulation

[Tim_Gilbert]

@Tim_Gilbert

I have bitten the bullet and started work on one of the two windows still needing their reveals “done”. It is the kitchen window and I am taking advantage on Mrs G’s absence for two weeks.

The window was boxed in with MDF, which I have prized from the sides and struggling to remove from the top.

Here are today’s “before” images.

There are plenty of voids to fill. I have bought insulating lime plater to produce a lasting finish. The area is small so I’m hoping results will look ok.

It’s cool and blowing outside so I thought I’d take “before” thermal images although it isn’t strictly before as I’ve been cleaning the surfaces ready for plastering. I also haven’t been able to remove the top board, which appears to have been glued in place with silicone sealant before being screwed. I think I’m about half way there. If conditions permit I’ll add a thermal image of the lintel once exposed.

The thermal camera has a narrower angle than the original photos but hopefully you can find your way around.